%20smaller%20size-2.png?width=1636&height=573&name=Templink%20Flat%20Logo%20(white)%20smaller%20size-2.png)
Getting Started with TempLink
Welcome to TempLink! This guide will walk you through setting up your temperature monitoring system to ensure optimal performance.
Step 1: Unbox Your TempLink System
- Ensure all components are present: Gateway, sensors, power cords, and Ethernet cable.
Step 2: Set Up the Gateway
- Connect the gateway to a power source using the provided power cord.
- Plug the Ethernet cable into the gateway and connect it to your network router.
Step 3: Access the TempLink Dashboard
- On your device, navigate to dashboard.templink.co.
- Log in with your credentials.
Step 4: Activate and Place Sensors
- Turn on each pre-programmed sensor by holding the "act" button for 5 seconds until the green light blinks.
- Place sensors in desired monitoring locations.
Step 5: Configure Alarm Parameters
- In the dashboard, set temperature thresholds for each sensor to receive timely alerts.
For detailed instructions, refer to our Installation Guide.